How Much Does It Cost to Reside a House? (Price Guide)

Residing means replacing the exterior cladding on your home: tearing off the old siding, repairing any damage underneath, and installing new material along with trim, flashing, and a moisture barrier. Two things set the price more than anything else, the size of the house and the siding you choose.

The figures below come from published guides and carry a check date of Oct 13, 2026. They describe professional installation. Your own quote will depend on your region, the shape of the house, and what the crew finds once the old siding comes off.

Material is the main choice, and the spread is wide. Vinyl and aluminum sit at the lower end, fiber cement and stucco sit in the middle, and brick and stone cost the most. The figures are installed prices per square foot, so labor is included.

Vinyl is the most common choice because it is the least expensive and needs little upkeep. Fiber cement costs more and holds paint well. Brick and stone last for generations but carry the highest price.

Larger homes need more siding, but the relationship is not one to one, because the amount of siding depends on wall area, windows, and rooflines, not floor area alone. The ranges below span the cheapest and most expensive materials for each home size.

Because each range covers every material, it is wide. Pick a material first, then use the per-square-foot table to narrow the figure.

Several line items sit outside the base price of the siding. Removing and disposing of the old material is a common one, and a permit may be needed depending on where you live.

Painting is a separate choice. Some siding comes pre-colored, while other types are painted after installation.

• Siding material. This sets the base price more than any other factor.
• House size and shape. Wall area, number of stories, and complicated rooflines add labor.
• Old siding removal. Tearing off layers of old siding takes time, and disposal fees apply.
• Hidden damage. Rot, mold, or water damage behind the old siding must be repaired before new siding goes on.
• Trim, soffit, and fascia. These pieces are often replaced at the same time and are priced separately.
• Insulation and house wrap. Adding a moisture barrier or insulated panels raises the cost.
• Labor rates. Contractor pricing varies by region and season.
• Permits. Some areas require a permit and an inspection.

Vinyl. Lowest price among the common materials, low maintenance, and available in many colors. It can crack in cold weather or warp from heat, and it does not look like natural wood.

Fiber cement. Resists fire, pests, and rot and holds paint well. It is heavier and harder to install than vinyl, so labor costs more, and it needs periodic repainting.

Wood. Natural look that can be painted or stained. It needs regular maintenance and is prone to rot and insect damage if it is not kept sealed.

Stucco. A durable, textured finish common in dry climates. It can crack over time, and repairs take skill.

Brick and stone. Long-lasting and fire resistant, with the highest upfront cost. The weight may require structural support, and installation is slow.

Published numbers differ because the guides measure different things. One may report the average cost of vinyl siding on a typical house, another may cover all materials across a range of sizes. Regional labor rates and the mix of homes in each sample also change the result.

Look at what each source counts before comparing. A figure that includes removal, trim, and permits will run higher than one that covers materials and installation only.

Siding does not last forever, and the signs are usually visible. Look for boards that are cracked, warped, or loose, paint that peels repeatedly, gaps where water can get in, or soft spots when you press on the wood. Rising energy bills or moisture inside the walls can also point to failing siding or a missing moisture barrier. If you see damage, a siding contractor or home inspector can tell you whether repair or full replacement makes more sense.

• Does the price cover removal and disposal of the old siding?
• What material, brand, and thickness are being quoted?
• Is house wrap, flashing, and trim included?
• How will rot or water damage be handled if it is found, and how is it priced?
• Is the permit included?
• What are the warranties on the product and on the installation?
• What is the timeline, and how will the crew protect landscaping?

Get at least three written quotes with the same material specified, so you compare like with like.