Front Door Replacement Cost: Average Prices & Cost Factors

A front door is one of the most visible parts of a house, and it also does real work as a barrier against weather and break-ins. Prices run from a basic slab to a custom door with sidelights and a smart lock, so the same project can cost very different amounts from house to house.

The numbers below come from published guides, checked as of Oct 11, 2026. Some sources price the door alone and others price the installed result, so the table labels matter.

NerdWallet splits exterior doors into three broad types. An entry door covers $150 – $3,000, a double door runs $1,250 – $6,030, and a storm or screen door runs $125 – $1,100. A double door has two leaves and a wider opening, which accounts for the higher floor. If you are changing the opening itself, the framing work is extra and can change the price a lot.

Installing a door replacement takes careful fitting. The frame has to be plumb, the gaps flashed and sealed, and the lock lined up with the strike plate. A prehung door, which arrives in its own frame, is the usual choice for a replacement.

Energy Home Improvements groups installed prices into three tiers. The good tier is a solid steel prehung door at $1,200 – $2,200. The better tier is an upgraded steel or fiberglass door at $2,200 – $3,800. The best tier is fiberglass with glass, sidelights, and premium hardware at $3,800 – $8,000. These are installed figures, so labor is part of them. Keep in mind this source is a home improvement company, so its tiers reflect what it sells.

If you are pricing labor on its own, NerdWallet lists two kinds of workers.

A door installation contractor runs $40 – $90/hr, and a handyperson runs $30 – $40/hr. A handyperson can be fine for a simple swap in an existing frame. For a new frame, a custom opening, or a door with sidelights, a carpenter or door specialist is the safer bet, because a poor install leads to drafts and water getting in.

Extras can add up faster than the door itself.

Window panels or transoms add $1,600 – $4,600. A sidelight costs $1,200 – $2,800 per side. A premium handleset and deadbolt runs $400 – $1,200, a smart lock $250 – $650, and a pet door $100 – $500. Pick the extras you will use. A smart lock, for instance, can be added later without redoing the door.

The sources here do not give a price for each material, but the choice shapes the budget, so the main trade-offs are worth knowing.

• Steel. Usually the lowest cost for a solid, secure door. It can dent, and it can rust if the finish is scratched.
• Fiberglass. Often costs more than steel. It can mimic wood grain and handles weather well, and it usually doesn't dent as easily.
• Wood. Offers a classic look and many custom options. It needs regular refinishing and can warp in harsh weather.

Ask the dealer for the door's insulation rating and the manufacturer's warranty, since both differ from product to product.

• Door material and style. Solid steel is the entry point, and glass, carved panels, or custom wood push the price up.
• Single or double. A double door needs a wider opening and two leaves.
• Sidelights and transoms. They add glass, framing, and installation time.
• Frame work. Rot or damage in the existing frame or sill needs repair.
• Hardware. Locks, handlesets, and hinges range from basic to premium.
• Finish. Painted, stained, or factory-finished doors cost different amounts.
• Energy rating. Better-insulated doors can cost more to buy.
• Location. Labor rates vary across the country.

The two sources above report very different ceilings and floors.

NerdWallet covers all exterior doors, including storm doors that cost little. Energy Home Improvements covers entry door replacement and begins higher, since it prices full installed doors. The headline range is broad because it combines basic and high-end doors.

A door that sticks, sags, or has a worn finish may only need adjusted hinges, new weatherstripping, or a fresh coat of paint. Replacement makes sense when the door is rotted, warped, damaged, or leaking air and water, or when you want a more secure or better-insulated one. A cracked frame or soft sill is a sign to have a pro look at the whole opening before buying a door.

A prehung door can be a DIY project for someone comfortable with a level, shims, and flashing tape. The door is heavy, and a mistake can leave gaps that let water in. Many dealers sell the door with installation, and some manufacturer warranties may require a certified installer, so check the terms before you start.

• Does the price include the door, frame, hardware, and finishing?
• Is removal and disposal of the old door included?
• What does the quote assume about the existing frame and sill?
• What are the warranties on the door, the glass, and the labor?
• When will the door arrive, if it is a special order?