How Much Does It Cost to Install Shower Door? (Price Guide)

A shower door keeps water inside the shower and defines the look of the bathroom. The price depends on the door style, the thickness of the glass, the size of the opening, and the labor. Framed doors are the budget choice, while frameless glass costs more because it uses thicker panels and more precise mounting.

The figures below come from a home-improvement publisher and from a cost guide that compiles contractor quotes, checked on Oct 13, 2026. They describe installed doors unless a label says otherwise.

Style is the biggest driver of price. The sources group doors differently, so both sets are shown.

Framed, semi-frameless, and frameless doors differ in how much metal surrounds the glass. A frameless door has the cleanest look and is easier to wipe down, but it needs thicker glass and careful installation.

Bigger openings need more glass and more hardware.

A standard door fits most prefabricated showers. A custom door is built for a specific opening, which raises the price, and it takes longer to make.

Most shower doors are installed by a glass installer or a general contractor. Labor can be hourly or a flat fee.

Some contractors charge a flat fee per door, so ask for the total in writing rather than comparing hourly rates.

• Door type. Sliding, hinged, pivot, and fixed-panel designs are priced differently.
• Frame style. Frameless is more expensive than framed.
• Glass thickness. Thicker tempered glass is heavier and costs more.
• Glass finish. Low-iron glass, frosted glass, and water-repellent coatings add to the bill.
• Hardware. Handles, hinges, and tracks come in several finishes and grades.
• Size and shape. Large, custom, or unusual openings cost more.
• Wall condition. Out-of-plumb walls or tile that is not level may need extra adjustment time.
• Removal. Taking out an old door or enclosure can add cost.
• Location. Labor rates vary by region.

Both sources describe the same product but not the same scope.

The first covers glass shower doors in general, from simple framed models to frameless setups. The second describes frameless doors only, which are more expensive, so its range runs higher. Whether installation, hardware, and removal are included may also differ from one source to the next.

Framed doors. Lower price, simple installation, and forgiving of walls that are not perfectly square. The metal frame has more seams where soap scum and mildew collect.

Semi-frameless doors. A middle option with fewer frame pieces and a slightly more open look.

Frameless doors. A clean look with fewer parts to wipe down. They cost more, need thicker glass, and depend on precise measurements.

The best choice depends on your budget, the size of the shower, and how much cleaning you want to do.

A replacement in an existing opening is usually simpler than a new installation in a remodel. If you are building a new shower, it is smart to choose the door before the tile goes in, because the type of door affects wall measurements and where the glass attaches. Tell the installer if the walls are tile, stone, or acrylic, since the mounting method differs.

A door kit may seem easy to install, but tempered glass is heavy, can shatter if it is chipped or stressed at the edge, and must be mounted level and plumb to seal properly. A poorly hung door can leak or swing open on its own. For custom glass and most frameless doors, hire a professional glass installer. Custom glass is cut to your measurements, so a measurement error is costly to correct. Check whether your local building department requires a permit and whether a licensed contractor is needed for any related work. A professional installation may also be needed to keep the manufacturer warranty valid.

• Does the quote include the door, hardware, installation, and removal of the old unit?
• What glass thickness and finish are quoted?
• Who measures the opening, and what happens if the measurement is wrong?
• How long will it take to fabricate and install?
• What are the warranty terms on the glass, hardware, and labor?