Skip to content

Home & Garden Plumbing & Water Cost guide

How Much Does It Cost to Install Toilet? (Price Guide)

Updated  3 sources

Typical installed cost

$250 – $800

Most toilet jobs are a swap: the old fixture comes out, a new wax ring and bolts go in, and the new toilet is set on the existing flange and supply line. That is a short job for a plumber. Costs rise when the flange is damaged, the supply valve fails, or the bathroom has no toilet plumbing at all.

Figures below come from Fixr, This Old House, and HomeTips, checked Oct 11, 2026. Each table separates the pieces, so you can tell what the toilet costs apart from what the installer charges.

Toilet installation cost by type

Item Typical range Relative price range
Two-piece toilet $200 – $950
One-piece toilet $250 – $1,100
Wall-mounted toilet $500 – $2,000
Macerating toilet $600 – $1,300
Smart toilet $750 – $4,000

Source: Fixr: Toilet installation cost

How Much Does a New Toilet Cost?

The fixture price is only one part of the bill. Two-piece toilets, with a separate tank and bowl, are the most common and least expensive. One-piece models are easier to clean and cost more.

New toilet price (fixture only)

Item Typical range Relative price range
Two-piece toilet $165 – $425
One-piece toilet $300 – $800

Source: This Old House: New toilet cost

Higher-priced models usually add features such as a taller bowl, a quieter flush, or a dual-flush mechanism. Check the rough-in measurement before you buy. The distance from the wall to the center of the drain decides which toilets will fit, and a wrong match means a return trip to the store.

Toilet Installation Cost by Type

Wall-mounted, macerating, and smart toilets cost far more to install than a standard floor-mounted one. A wall-mounted toilet hides its tank in the wall and needs a carrier frame. A macerating toilet grinds waste so it can leave through a small pipe, which is common when a bathroom is added below the main drain line. Smart toilets add a water line and an electrical outlet nearby for functions like a heated seat or bidet wash.

Replacing a Toilet vs. Installing One for the First Time

A like-for-like replacement is the easiest case. A first-time installation is a plumbing project, because someone has to run a drain, a vent, and a water supply to a spot where none exist.

Replacement vs. first-time installation

Item Typical range Relative price range
Replacing an existing toilet $250 – $800
Installing a toilet for the first time $1,000 – $3,500

Source: Fixr: Toilet installation cost

If you are adding a bathroom, expect the plumber to open walls or floors, and expect a permit. Ask for an itemized quote, since new drain lines are often priced separately from the fixture.

Toilet Installation Labor Cost

Labor is usually a flat fee for a standard swap. Some plumbers bill hourly, and a handyman may charge less than a licensed plumber but may not be allowed to do certain work in every state.

Labor

Item Typical range Relative price range
Labor only (Fixr) $150 – $440
Basic installation, labor only (HomeTips) $225 – $450

Sources: Fixr: Toilet installation cost; HomeTips: Toilet replacement cost

Labor-only figures differ because the sources define the job differently. One may assume the fixture is already on site, while another may include haul-away or basic parts.

Repairs and Extras That Can Add to the Bill

Problems that show up once the old toilet is lifted are the most common reason a quote grows. A cracked flange, a corroded shutoff valve, or a rotted floor around the base can add time before the new toilet goes in.

Repairs and extras

Item Typical range Relative price range
Toilet flange repair $150 – $400
Replace shutoff valve $50 – $150
Old toilet disposal $50 – $150

Source: HomeTips: Toilet replacement cost

A running toilet or weak flush is often a worn flapper or fill valve, which are inexpensive parts. A cracked bowl or a base that leaks cannot be fixed and calls for a new toilet.

What Affects the Cost of Installing a Toilet?

  • Toilet type. Standard floor-mounted models are the cheapest. Wall-mounted, macerating, and smart units are not.
  • Existing plumbing. Reusing the current flange and supply line keeps the job short.
  • Floor condition. Water damage around the old toilet must be repaired before the new one is set.
  • Access. Tight bathrooms and upper floors add time.
  • Who does the work. A plumber, handyman, and DIY route have different cost and risk profiles.
  • Old toilet removal. Some installers haul it away and others charge for it.

Why Estimates Vary

Published guides disagree because they cover different slices of the job. One counts the fixture and labor together, another counts labor only, and another includes only mid-range toilets.

Estimates by source

Item Typical range Average Relative price range
Fixr $250 – $800$450
This Old House $500 – $800—
HomeTips $400 – $850—

Sources: Fixr: Toilet installation cost; HomeTips: Toilet replacement cost; This Old House: New toilet cost

When you read these numbers, check whether the toilet is included, whether removal is included, and whether the figure covers standard or specialty models.

Should You Install a Toilet Yourself?

Setting a standard toilet is one of the more approachable plumbing tasks. You turn off the water, remove the old unit, fit a new wax ring or seal, set the bowl, and tighten the bolts evenly. The risk lies in the details. Overtightening can crack the porcelain, and a poor seal can leak into the subfloor without any obvious sign. Wall-mounted, macerating, and new-bathroom installs are better left to a licensed plumber, and some jurisdictions require a permit for them.

What to Ask When Getting Quotes

  • Is the toilet included, or do I supply it?
  • Does the price cover a new wax ring, bolts, and supply line?
  • Is removal and disposal of the old toilet included?
  • What happens if the flange or subfloor needs repair?
  • Is the plumber licensed and insured, and is the work warrantied?

Frequently asked questions

How much does it cost to install a toilet?

The typical total is $250 – $800 per Fixr, with a midpoint near $450. That includes the toilet and the labor to set it.

How much does a new toilet cost?

A two-piece toilet alone is listed at $165 – $425 and a one-piece at $300 – $800. These are fixture prices before installation.

How much does it cost to replace a toilet?

Replacing an existing toilet runs $250 – $800 installed. A first-time installation costs more, at $1,000 – $3,500, because new plumbing is needed.

How much do plumbers charge to install a toilet?

Labor alone is listed at $150 – $440 by Fixr and $225 – $450 by HomeTips. A handyman may quote less, but check what your state allows.

How much does it cost to repair a toilet?

The sources here price the extras rather than every repair. A flange repair is listed at $150 – $400 and a new shutoff valve at $50 – $150.